GI Structure P2
Visit the TSE store ★ ★ ★ ★ ★ 0.0 0 reviews
Smart Choice
for Roof Mounting Structures
About this item
Product details
- Brand
- TSE
- Model
- P2
- Finish
- Zinc-coated with optional powder coat
- Coating
- Zinc coating typically 80-100 µm or higher
- Clamping
- Compatible with end and mid clamps
- Material
- Galvanized Iron (GI) steel, hot-dip galvanized
- Fasteners
- SS or GI nuts and bolts (SS recommended)
- Durability
- Outdoor-rated when properly coated and installed
- Tilt Angle
- Fixed, typically 10°-20°
- Orientation
- Portrait or landscape (site-dependent)
- Structure Type
- P2 multi-panel support frame
- Footings / Base
- Flat base with anchor bolts to concrete or pad
- Wind Load Design
- Per local site requirements (often 120-150 km/h+)
- Module Compatibility
- Standard framed PV modules
Product description
Built for outdoor service life, the structure uses hot-dip galvanized steel for corrosion resistance, pre-drilled modular channels for faster assembly, and anchor-ready footings for secure fixing to concrete pads or roof slabs. Tilt angle is set during installation-typically between 10° and 20° depending on site latitude and shading conditions.
Ideal for residential rooftops, small commercial arrays, and ground-mounted systems where a simple fixed-tilt solution is required. Final wind and structural design should be verified against local codes; many rooftop installations in Pakistan are engineered for wind speeds in the 120-150 km/h range or higher where required.
Use cases: - Residential rooftop systems with multiple panels - Small commercial PV installations - Ground-mounted arrays with fixed tilt
Other Sellers
| Seller | Price | Stock | Location | Rating | |
|---|---|---|---|---|---|
| Smart Energy | PKR 4,570 | 100 in stock | Faisalabad, Nishatabad | 5.00 (120) | Login to buy |
| The Sitara Engineers | PKR 4,570 | 100 in stock | Faisalabad, Nishatabad | 4.80 (42) | Login to buy |
Frequently Asked Questions
The TSE GI Structure P2 is a galvanized iron mounting frame for solar photovoltaic modules.
GI Structure P2 is manufactured by TSE.
Model number is P2.
Model number is P2.
GI Structure P2 Brand is TSE.
GI Structure P2 Model is P2.
GI Structure P2 Finish is Zinc-coated with optional powder coat.
GI Structure P2 Coating is Zinc coating typically 80-100 µm or higher.
GI Structure P2 Clamping is Compatible with end and mid clamps.
GI Structure P2 Material is Galvanized Iron (GI) steel, hot-dip galvanized.
GI Structure P2 Model is P2.
GI Structure P2 Finish is Zinc-coated with optional powder coat.
GI Structure P2 Coating is Zinc coating typically 80-100 µm or higher.
GI Structure P2 Clamping is Compatible with end and mid clamps.
GI Structure P2 Material is Galvanized Iron (GI) steel, hot-dip galvanized.
Customer feedback (0)
No reviews yet.