GI Structure P1
Visit the TSE store ★ ★ ★ ★ ★ 0.0 0 reviews
Smart Choice
for Roof Mounting Structures
About this item
Product details
- Brand
- TSE
- Model
- P1
- Material
- Galvanized Iron (GI) steel
- Finish
- Zinc-coated anti-corrosion surface
- Surface Type
- Flat / concrete base, surface mounted
- Orientation
- Portrait (P1 configuration)
- Module Compatibility
- Standard framed PV modules (60/72 cell)
- Tilt Angle
- Fixed, typically ~15°
- Wind Load Design
- Per local requirements (often ~150 km/h)
- Clamping
- Compatible with mid and end clamps
- Fasteners
- GI or SS nuts and bolts (SS recommended)
- Base / Feet
- Flat feet with anchor bolts into concrete
- Corrosion Protection
- Galvanization typically 80-100 µm
- Service Life
- 20+ years with proper installation and coating
Product description
The P1 frame uses zinc-coated GI steel for corrosion resistance, flat feet for anchoring with bolts into concrete or pavers, and standard mid and end clamp compatibility. Typical fixed tilt is around 15°, which suits mid-latitude sites; final angle should be set per location and shading review.
Designed for wind resistance in line with common local practice (often around 150 km/h depending on engineering), with galvanization typically in the 80-100 µm range. Stainless steel fasteners are recommended where long-term corrosion protection is a priority. With correct installation and coating, GI structures can provide decades of outdoor service.
Use cases: - Residential rooftop solar - Small commercial solar arrays - Flat-surface installations - Simple fixed mounts where adjustable tilt is not required
Installation is normally completed with anchor bolts into a concrete roof slab or pad. Compatible with standard 60-cell and 72-cell framed modules.
Other Sellers
| Seller | Price | Stock | Location | Rating | |
|---|---|---|---|---|---|
| Smart Energy | PKR 3,400 | 100 in stock | Faisalabad, Nishatabad | 5.00 (120) | Login to buy |
| The Sitara Engineers | PKR 3,400 | 100 in stock | Faisalabad, Nishatabad | 4.80 (42) | Login to buy |
Frequently Asked Questions
The TSE GI Structure P1 is a galvanized iron solar mounting frame for framed photovoltaic modules in portrait configuration.
GI Structure P1 is manufactured by TSE.
Model number is P1.
Model number is P1.
GI Structure P1 Brand is TSE.
GI Structure P1 Model is P1.
GI Structure P1 Material is Galvanized Iron (GI) steel.
GI Structure P1 Finish is Zinc-coated anti-corrosion surface.
GI Structure P1 Surface Type is Flat / concrete base, surface mounted.
GI Structure P1 Orientation is Portrait (P1 configuration).
GI Structure P1 Model is P1.
GI Structure P1 Material is Galvanized Iron (GI) steel.
GI Structure P1 Finish is Zinc-coated anti-corrosion surface.
GI Structure P1 Surface Type is Flat / concrete base, surface mounted.
GI Structure P1 Orientation is Portrait (P1 configuration).
Customer feedback (0)
No reviews yet.