The Xenon 12066 is described as a hybrid solar inverter with a 7-inch touchscreen HMI (Human-Machine Interface) LCD.
It has an IP66 rating, meaning it’s sealed against strong dust ingress and powerful water jets — suitable for fairly harsh or outdoor environments.
It’s rated at 6.6 kW (6600 W) output, with a PV input capacity up to 12 000 W (12 kW).
Supports dual MPPT (Maximum Power Point Tracking) — good for optimizing performance if you connect solar panels. It can run without battery (battery-independent design), which gives flexibility depending on your setup.
It reportedly includes built-in Wi-Fi — which may enable remote monitoring or control.
IP66 protection means dust-tight and protected against heavy water jets — helpful if the inverter will be installed outdoors or in dusty/moist surroundings (e.g. in a warehouse, rooftop solar, etc.).
The 7" touchscreen HMI gives a user-friendly interface to monitor solar generation, battery status (if used), load status, configurations — handy for onsite control rather than only remote monitoring.
Dual MPPT + high PV input power make it suited for medium-to-large domestic or light commercial solar installations.
As a hybrid inverter, this is not just a display — it’s the core inverter unit for a solar + battery (or solar + grid) system. If you only want a plain HMI panel, this is overkill.
IP66 refers to enclosure protection — but you must ensure proper installation (sealing, mounting, ventilation if needed) for real protection against dust/water.
For solar setups, make sure you match PV array voltage and capacity to the inverter’s specs (check PV input range and panel configuration).
Maintenance/support: Because this is a relatively powerful inverter, check availability of spare parts, warranty, and after-sales support (especially in your area).
No review given yet!
Fast Delivery all across the country
Safe Payment
7 Days Return Policy
100% Authentic Products